Plaqueuse de chants droits - HolzProfi PLC2
PLC2 Edgebander, with glue box, plates straight edges with automatic feed and applies glue directly to wood panels and plastic edges (in rolls up to 3 mm and in strips up to 4 mm thick).
- PLC2 Edgebander, with glue box, plates straight edges with automatic feed and applies glue directly to wood panels and plastic edges (in rolls up to 3 mm and in strips up to 4 mm thick).
- It is equipped with front and rear automatic end cutting, a trimming unit and a polishing unit on both sides of the workpiece.
- Its unique training guide makes it possible to work songs of variable thicknesses without adjustments.
- An aspiration in the table allows to have a work surface always clean.
- The regulation of the temperature is electronic.
- The saws easily cut 3mm thick edges.
- The synthetic table inserts and the very resistant rollers make it possible to work large pieces.
- Parts are fed by a superior drive system.
- Fine adjustment of the trimming units and the thickness of the edge.
11 971,97 €
|Thickness of edge mm||04-3|
|Edge height mm||10-45|
|Dimensions of the table mm||1400x600|
|Extendable front table mm||310|
|Dimensions with panel mm||300x90|
|Automatic feed speed m / min||5|
|Supports reel mm||Ø600|
|Cutting blades||2xØ80x2.4, 3.0x70, Z16|
|RPM rotation speed rpm||9000|
|Carbide trimming tool holders||2x Ø75x12mm, Z4, 12 ° / R2|
|Rotation speed of the tool gates t / min||10000|
|Need of compressed air bar||6.5|
|Glue heating unit||5|
|Capacity of teflon glue container kg||1.1|
|Power of 5 heating units||1.2kw, 380v, 50Hz|
|Motor advance||0.56kw, 380v, 50Hz|
|Moving motor glue / edge tray||0.18kw, 380v, 50Hz|
|Blade motor||0.56kw, 380v, 50Hz|
|Tool-holder motor||0.56kw, 380v, 50Hz|
|Total power||2.5kw, 380v, 50Hz|